Headline Filters logo
email headline filters call headline filters

Instrumentation Filters


Headline filters are one of the largest manufacturers of instrumentation and gas analysis filters in the world and have an enviable reputation within the industry.

Headline filter housings and cartridges are suited for use in a wide range of applications.

Headline filters offer many advantages over traditional filtration methods with its ability to be used in high temperature applications and chemically aggressive environments as well as for general purpose filtration.

Headline 110 & 120 series filter housings are constructed entirely from 316L stainless steel with viton seals. They are free from welds and comply with NACE MR-01-75.

Principal Specifications

Housing Model 110 112 114 116 120 122 124 126
Port Size - NPT 1/8" 1/4" 1/8" 1/4" 1/8" 1/4" 1/8" 1/4"
Drain Size - NPT 1/8" 1/4" None None 1/8" 1/4" None None
Max. Pressure - Bar (1) 340 340 340 340 340 340 340 340
Max. Temperature - ºC (2) 200 200 200 200 200 200 200 200
Filter Element Codes (3)                
Disposable Element 12-32-xx 12-32-xx 12-32-xx 12-32-xx 12-57-xx 12-57-xx 12-57-xx 12-57-xx
Stainless Steel Element SS-12-32-xx SS-12-32-xx SS-12-32-xx SS-12-32-xx SS-12-57-xx SS-12-57-xx SS-12-57-xx SS-12-57-xx
PTFE Element PT-12-32-xx PT-12-32-xx PT-12-32-xx PT-12-32-xx PT-12-57-xx PT-12-57-xx PT-12-57-xx PT-12-57-xx
For more information please click link  110 Data Sheet 112 Data Sheet 114 Data Sheet 116 Data Sheet 120 Data Sheet 122 Data Sheet 124 Data Sheet 126 Data Sheet

Notes:


(1) Above 200ºC the pressure rating is reduced, consult Headline Filters for the exact rating at any specific temperature.

(2) Maximum temperature 200ºC using standard seals. For temperatures up to 450ºC use a high temperature gasket.

(3) Replace ‘xx’ with grade required, e.g. 12-32-50C, SS-12-32-25, PT-12-32-03.

 

The Headline Membrane Filter consists of a highly porous hydrophobic or oleophobic PTFE membrane in a stainless steel/PTFE housing with two bypass ports and inlet and outlet ports. The ports are designed to allow for permanent pipework, thereby enabling easy maintenance of the filter membrane. Within the housing 3 angled venturies cause the gas to be rotated beneath the membrane, helping to keep the membrane clean and at the same time allowing the finer gas molecules to pass through the membrane for gas sampling and leaving the larger liquid molecules to exit through the bypass ports. Further benefits of the Headline Membrane Filter are that it is extremely inert and is recommended for most applications, the only exception being hydrofluoric acid. It is always recommended to use a coalescing pre-filter and to use the membrane filter as the last form of protection. The membrane is currently available in high flow applications.

Principal Specifications

Housing Model GMS050 GMS100 GMS105 GMS205 GSC205 GMS170 GMS122
Port Size - NPT 1/8"  1/4" 1/8" or 1/4" 1/4" or 1/2" 1/4" or 1/2" 1/4" 1/4"
Maximum Pressure - Bar 100  100 100 100 100 150 100
Maximum Temperature - ºC 150  150 150 150 150 150 150
For more information please click link GMS050 Data Sheet GMS100 Data Sheet GMS105 1/8" Data Sheet GMS205 1/4" Data Sheet GSC205 1/4" Data Sheet GMS170 Data Sheet GMS122 Data Sheet
      GMS105 1/4" Data Sheet GMS205 1/2" Data Sheet GSC205 1/2" Data Sheet    

 


Downloads & Technical details

Related Products

Further Information

Please contact us with any questions, we're here to help.